RouterOSをアップデート 6.45.3

Mikrotik RouterOSをアップデートした記録 6.45.3

アップデート内容確認

MikrotikのRouterOSを6.45.3にWinboxを使ってアップデートします

変更点の確認はこちら
MikroTik Routers and Wireless – Software
https://mikrotik.com/download/changelogs

What's new in 6.45.2 (2019-Jul-17 10:04): 

Important note!!! 
Due to removal of compatibility with old version passwords in this version, downgrading to any version prior to v6.43 (v6.42.12 and older) will clear all user passwords and allow password-less authentication. Please secure your router after downgrading. 
Old API authentication method will also no longer work, see documentation for new login procedure: 

Manual:API - MikroTik Wiki
wiki.mikrotik.com
 

*) bonding - fixed bonding running status after reboot when using other bonds as slave interfaces (introduced in v6.45); 
*) cloud - properly stop "time-zone-autodetect" after disable; 
*) interface - fixed missing PWR-LINE section on PL7411-2nD and PL6411-2nD (introduced v6.44); 
*) ipsec - added "connection-mark" parameter for mode-config initiator; 
*) ipsec - allow peer argument only for "encrypt" policies (introduced in v6.45); 
*) ipsec - fixed peer configuration migration from versions older than v6.43 (introduced in v6.45); 
*) ipsec - improved stability for peer initialization (introduced in v6.45); 
*) ipsec - show warning for policies with "unknown" peer; 
*) ospf - fixed possible busy loop condition when accessing OSPF LSAs; 
*) profile - added "internet-detect" process classificator; 
*) radius - fixed "User-Password" encoding (introduced in v6.45); 
*) ssh - do not enable "none-crypto" if "strong-crypto" is enabled on upgrade (introduced in v6.45); 
*) ssh - fixed executed command output printing (introduced in v6.45); 
*) supout - fixed supout file generation outside of internal storage with insufficient space; 
*) upgrade - fixed "auto-upgrade" to use new style authentication (introduced in v6.45); 
*) vlan - fixed "slave" flag for non-running interfaces (introduced in v6.45); 
*) wireless - improved 802.11ac stability for all ARM devices with wireless; 
*) wireless - improved range selection when distance set to "dynamic";
What's new in 6.45.3 (2019-Jul-29 12:11):

Important note!!!
Due to removal of compatibility with old version passwords in this version, downgrading to any version prior to v6.43 (v6.42.12 and older) will clear all user passwords and allow password-less authentication. Please secure your router after downgrading.
Old API authentication method will also no longer work, see documentation for new login procedure:

Manual:API - MikroTik Wiki
wiki.mikrotik.com


*) certificate - renew certificates via SCEP when 3/4 of lifetime reached;
*) crs317 - fixed multicast packet receiving (introduced in v6.45);
*) hotspot - fixed default profile values not being used (introduced in v6.45);
*) rb4011 - fixed SFP+ interface linking (introduced in v6.45.2);
*) smips - reduced RouterOS main package size (disabled LTE modem, dot1x and SwOS support);
*) supout - fixed SIM slot printing (introduced in v6.45);
*) wireless - improved U-APSD (WMM Power Save) support for 802.11e;

6.45.2の記事を作るのにモタモタしてる間に6.45.3がリリースされてしまいました
6.45化した際の不具合修正がメインですがようやく落ち着いてきた感じがします

6.45.2でIPSec周りの修正があります

アップデートの手順

事前にバックアップをした上で以下の操作でアップデートを実行

RouterOSのアップデート

System→PackagesでPackage Listを開いて左上の「Check For Updates」を選択

6.45.3へアップデートと表示出てるのを確認して「Download&Install」を押す

無事に完了すると自動で再起動開始されます
再起動後にPackage ListにてVersionが6.45.3になっているのを確認

FWのアップデート

FW更新を行うためSystem→Routerboardを開く
Upgrade Firmwareが6.45.3になっているのを確認して「Upgrade」ボタンを選択

確認画面を経て更新完了すれば以下メッセージが表示される
”Firmware upgraded successfully. please reboot for changes to take effect!”

指示通りSystem→Rebootから再起動
再起動後にSystem→RouterboardにてCurrent Firmwareが6.45.3になっているのを確認

最後に最新Verの状態でバックアップをして完了

コメント