RouterOSをアップデート 6.44→6.44.1

Mikrotik RouterOSをアップデートした記録 6.44→6.44.1

アップデート内容確認

MikrotikのRouterOSを
6.44から6.44.1にWinboxを使ってアップデートします

変更点の確認はこちら
MikroTik Routers and Wireless – Software
https://mikrotik.com/download/changelogs

What's new in 6.44.1 (2019-Mar-13 08:38):

Changes in this release: 

*) bridge - fixed possible memory leak when using "ingress-filtering=yes" on bridge interface;
*) certificate - force 3DES encryption for P12 certificate export;
*) dhcp - fixed dual stack queue addition;
*) dhcpv6-server - use MAC address for RADIUS user when "allow-dual-stack-queue=yes";
*) e-mail - fixed missing "from" address for sent e-mails (introduced in v6.44);
*) gps - increase precision for dd format;
*) gps - removed unnecessary leading "0" for dd format;
*) ipsec - allow identities with empty XAuth login and password if RADIUS is enabled (introduced in v6.44);
*) ipsec - fixed dynamic L2TP peer and identity configuration missing after reboot (introduced in v6.44);
*) ipsec - use "remote-id=ignore" for dynamic L2TP configuration (introduced in v6.44);
*) ipv6 - do not allow setting "preferred-lifetime" longer than "valid-lifetime";
*) lte - do not show "session-uptime" if session is not up;
*) lte - fixed LTE interface band setting on RBSXTLTE3-7 (introduced in v6.44);
*) rb4011 - fixed ether10 failing to auto negotiate link speed to 1Gbps;
*) winbox - added "use-local-address" parameter in "IP/Cloud" menu;
*) wireless - fixed antenna gain setting on RBSXT5nDr2;

前回がメジャーアップデートだったのでその修正がメインです
所要時間は5分程度

アップデートの手順

事前にバックアップをした上で以下の操作でアップデートを実行

RouterOSのアップデート

System→PackagesでPackage Listを開いて左上の「Check For Updates」を選択

6.44から6.44.1へアップデートと表示出てるのを確認して「Download&Install」を押す

無事に完了すると自動で再起動開始されます
再起動後にPackage ListにてVersionが6.44.1になっているのを確認

FWのアップデート

FW更新を行うためSystem→Routerboardを開く
Upgrade Firmwareが6.44.1になっているのを確認して「Upgrade」ボタンを選択

確認画面を経て更新完了すれば以下メッセージが表示される
”Firmware upgraded successfully. please reboot for changes to take effect!”

指示通りSystem→Rebootから再起動
再起動後にSystem→RouterboardにてCurrent Firmwareが6.44.1になっているのを確認

最後に最新Verの状態でバックアップをして完了

コメント